4ch / 2ch Contact Closure Fiber Converter Card | Network Switch & Media Converter Manufacturer | CTC Union
The FRM220-CCF contact closure fiber converter comes in two models, one with 2 channels (CCF20) and one with 4 channels (CCF40) and provides the transmission of contact closure over a single fiber optic link. With SFP cage on fiber ports, the FRM220-CCF gives you the fiber cabling connector SFP-LC, both multi-mode and single-mode, as well as BiDi which allows bi-directional transmission using only a single fiber core. The FRM220-CCF has contact inputs and 0.5 amp contact output relays. The relay output follows the “relay input” from the remote end. When the remote “relay input” is shorted, the local relay output is closed and vice-versa. Any one of the relay outputs can be configured to close when “carrier loss” is detected from the remote end. (Either through a CH01M console or via NMC in managed chassis.) Carrier Loss indicates that the optical fiber is disconnected or that the remote end has lost power and is not operating. This "carrier loss" relay can then be connected to an appropriate alarm circuit. CTC Union is high-quality 4ch / 2ch Contact Closure Fiber Converter Card, Contact Closure Fiber Converter with In-Band Management manufacturer from Taiwan since 1993. CTC Union, founded in 1993, is a Taiwan manufacturer of telecommunication products (ex. L2 Ethernet switch, TDM, Transponder) and industrial Ethernet switch, converter, injector. Strictly control all product design, CTC Union’s products pass strict tests and certifications ex. CE, FCC, UL, IEC 62443-4-1, EN50155, EN45545-2, IEC61850-3 standard etc. CTC Union partners with voice and data carriers, enterprises, and industrial grade Ethernet users covers all continents and areas. This global partnership receives direct engineering and technical support from headquarters, located in Taipei, Taiwan. With more 30 years professional experience, CTC Union is a Taiwan manufacturer of telecommunication products and industrial Ethernet switch, converter, injector. Strictly control all product design.
4ch / 2ch Contact Closure Fiber Converter Card
FRM220-CCF40 & FRM220-CCF20
Contact Closure Fiber Converter with In-Band Management
The FRM220-CCF contact closure fiber converter comes in two models, one with 2 channels (CCF20) and one with 4 channels (CCF40) and provides the transmission of contact closure over a single fiber optic link. With SFP cage on fiber ports, the FRM220-CCF gives you the fiber cabling connector SFP-LC, both multi-mode and single-mode, as well as BiDi which allows bi-directional transmission using only a single fiber core. The FRM220-CCF has contact inputs and 0.5 amp contact output relays. The relay output follows the “relay input” from the remote end. When the remote “relay input” is shorted, the local relay output is closed and vice-versa. Any one of the relay outputs can be configured to close when “carrier loss” is detected from the remote end. (Either through a CH01M console or via NMC in managed chassis.) Carrier Loss indicates that the optical fiber is disconnected or that the remote end has lost power and is not operating. This "carrier loss" relay can then be connected to an appropriate alarm circuit.
Features
- Transmits a single contact closure in one or two directions
- Distances up to 120km
- 30 VDC, 0.5 amp relay N.O. (Normally Open)
- Point-to-Point transmission architecture
- Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments
- Relay contact for Carrier Detect, N.C. (Normally Close)
- Indicating LEDs are provided for confirming equipment operating status
- Managed when places in FRM220 chassis with NMC
Application
- Related Products
Industrial 4 channel Binary Transducer
IFC-BT40
IFC-BT40 is a four channel, binary transducer, which registers binary information from contacts...
Details Add to List- Download
Download 
4ch / 2ch Contact Closure Fiber Converter Card | Network Switch & Media Converter Manufacturer | CTC Union
Based in Taiwan since 1993, CTC Union Technologies Co., Ltd. has been a manufacturer of networking products and a provider of industrial networking solutions. Its main networking products include, 4ch / 2ch Contact Closure Fiber Converter Card, network switches, fiber optic cables, network routers, media converters, bypass switches, fiber optic multiplexers, fiber single mode media converters. Industrial networking solutions for optical transport, factory automation, intersection monitoring, wireless network security, traffic monitoring, tunnel and cell tower safety control, wireless machine networking, data offloading, PoE-powered office automation, campus network access.
CTC Union, founded in 1993, is a Taiwan manufacturer of telecommunication products (ex. L2 Ethernet switch, TDM, Transponder) and industrial Ethernet switch, converter, injector. Strictly control all product design, CTC Union’s products pass strict tests and certifications ex. CE, FCC, UL, IEC 62443-4-1, EN50155, EN45545-2, IEC61850-3 standard etc. CTC Union partners with voice and data carriers, enterprises, and industrial grade Ethernet users covers all continents and areas. This global partnership receives direct engineering and technical support from headquarters, located in Taipei, Taiwan.
CTC Union has been providing customers with high quality networking products and networking solutions since 1993, with both advanced technology and 28 years of experience, CTC Union ensures that each customer's requirements are met.