Industrial Passive PoE Converter: INJ-IG03-PH


Industrial Gigabit IEEE802.3af/at PoE to Passive PoE Converter

INJ-IG03-PH is an Industrial Grade, Gigabit Ethernet, passive PoE injector, designed to take IEEE802.3af/at standard PoE as input and deliver Passive PoE with switchable DC output voltages of 12V, 19V and 24V. This device is very useful when installing any non-standard PoE power devices, such as entry level PoE Camera or Wireless AP, that need the direct power over Ethernet without any protocol negotiation. When connected with PSE switches, the INJ-IG03-PH appears as standard PD equipment powered by the PoE switch, without any additional electrical power input required. The non-standard power output is switchable to either Alternative A mode (power on pins 1,2,3,6) or Alternative B mode (power on pins 4,5,7,8). Simple settings make it a plug and play device, requiring no tools or software configuration, and make it easy to use, with flexible installation and high reliability.

  • Converts 48V IEEE802.3af/at PoE Input to 12/19/24V Passive PoE Output (Figure 1)
  • Supports input PoE IEEE802.3af/at A mode (1,2,3,6) or B mode (4,5,7,8)
  • Selectable passive PoE output voltage, 12/19/24VDC select by slide SW
  • Selectable passive PoE output mode, A mode (1,2,3,6,) or B mode (4,5,7,8) select by slide SW
  • Compliant with 10/100/1000Base-T(X)
  • CE, FCC, Railway traffic EN50121-4 certified
  • Heavy industrial grade EMS, EMI, EN61000-6-2, EN61000-6-4 certified
  • Wide operating temperature -40 ~ 75°C (INJ-IG03-PHE)
  • IP30 rugged metal housing and fanless

INJ-IG03-PH application topology

  PDF Download      Where To Buy

Search Product

Follow Us

Contact Us

8F No. 60 Zhouzi St., Neihu District, Taipei 114, Taiwan
: +886-2-2659-1021 / :

Copyright © 1993-2022 CTC Union. All Rights Reserved.