10G Base-T to 10G Base-R SFP+ Media Converter

10G Base-T to 10G Base-R SFP+ Media Converter

The FRM220-10GC-TS is a copper to fiber 10G Ethernet media converter based on IEEE802.3an and IEEE802.3ae. With SNMP and Web-based management in the FRM220, the Network administrator can monitor, configure and control the activity of each card in the chassis. This converter uses Cat.6a/Cat 7 twisted pair cable as copper transmission media with RJ-45 and 10G optical solution with SFP+ LC connector. The data stream can be converted bi-directionally from 10G Base-T to 10G Base-R and vice versa. With full duplex wire speed forwarding capability between these two media, the FRM220-10GC-TS brings you the best and simplest solution for the 10G Ethernet conversion between copper wire and fiber.

  • Network Management via FRM220 Chassis
  • Complies with IEEE802.3an 10GBase-T and IEEE802.3ae 10GBase-R
  • Real-Time conversion between 10GBase-T and 10GBase-R
  • Common used SFP+ fiber interface and RJ45 connector
  • Full duplex wire speed forwarding
  • Forwarding l8k bytes jumbo packet
  • Loopback Test
  • Link Fault Pass Through
  • Fiber Fault Alert
  • IEEE 802.1q VLAN pass through
  • Supports manual Dip Switch for quick set up

10G Media Conversion application

  PDF Download      Where To Buy




Taiwan, 114台北市內湖區洲子街60號8樓
: +886-2-2659-1021 / :

Copyright © 1993-2018 CTC Union. All Rights Reserved.