Copper to Fiber 10G Ethernet Media Converter: FRM220-10GC-TS


10G Base-T to 10G Base-R SFP+ Media Converter

10G Media Converter Card: FRM220-10GC-TS

The FRM220-10GC-TS is a copper to fiber 10G Ethernet media converter based on IEEE 802.3an and IEEE 802.3ae. With SNMP and Webbased management in the FRM220, the administrator can monitor, configure and control the activity of each card in the chassis. This converter uses Cat.6a/Cat 7 twisted pair cable as copper transmission media with RJ-45 and 10G optical solution with SFP+ LC connector. The data stream can be converted bi-directionally from 10G Base-T to 10G Base-R and vice versa. With full duplex wire speed forwarding capability between these two media, the FRM220-10GC-TS brings you the best and simplest solution for the 10G Ethernet conversion between copper wire and fiber.

  • Device Management via FRM220 Chassis with NMC
  • Complies with IEEE 802.3an 10GBase-T and IEEE 802.3ae 10GBase-R
  • Real-Time conversion between 10GBase-T and 10GBase-R
  • Common used SFP+ fiber interface and RJ45 connector
  • Full duplex wire speed forwarding
  • Forwarding 18k bytes jumbo packet
  • Loopback Test
  • Link Fault Pass Through
  • Fiber Fault Alert
  • IEEE 802.1q VLAN pass through
  • Supports manual Dip Switch for quick set up

10G Media Conversion application

10G Media Conversion application

  PDF Download      Where To Buy




Taiwan, 114台北市內湖區洲子街60號8樓
: +886-2-2659-1021 / :

Copyright © 1993-2023 CTC Union. All Rights Reserved.