iMux4A-100

Ethernet to 4E1 Multiplexer

Ethernet to 4E1 Multiplexer

The iMux4A-100 is an E1 inverse multiplexer capable of bundling up to 4 E1 lines for cost-effective connection of 10/100Base-TX or 100Base- FX LANs over multiple E1 transports. The iMux4A-100 inverse multiplexer transmits up to a 9.92Mbps Ethernet bridge channel (GFP-F encapsulated) over 4 E1 links. The iMux4A-100 bridges the gap between E1 and E3, allowing bridges to operate at faster rates. It also provides high speed access to SDH/SONET backbones where the only access services available are E1 lines. The iMux4A-100 supports an E1 attenuation of up to 43 dB on twisted pair or coax cable. This provides an approximate operating range up to 2km (using 22AWG). The iMux4A-100 fully meets E1 specifications including ITU-T G.703 and G.823. The iMux4A-100 features diagnostic capabilities for performing remote loopback. The operator at either end of the line may test both the iMux4A-100 and the line in the digital loopback mode. The Ethernet copper interface supports auto-negotiation and auto MDI/MDIX, allowing plug-and-play Ethernet connection without any additional configuration.

  • Connects one Fast Ethernet over 1-4 E1 links (1.984 ~ 7.92Mbps)
  • Built-in GFP bridge operates at WAN rate
  • Auto-Negotiation
  • Unbalanced E1/BNC or balanced E1/RJ45
  • LED Alarm indication
  • Supports RS232 console management


  PDF Download      Where To Buy


Search Product

Follow Us

Contact Us

8F No. 60 Zhouzi St., Neihu District, Taipei 114, Taiwan
: +886-2-2659-1021 / : sales@ctcu.com

Copyright © 1993-2017 CTC Union. All Rights Reserved.

Translate