ERM-MUX-Plus

4x E1 Multiplexer

4x E1 Multiplexer

The ERM-Mux-plus is a 4U 19(23)" 14-slot rack type E1 Time Division Multiplexer for Fractional E1 network access which is designed for non-stop operation. There are 10 slots available for hot-swappable ERM-Mux-plus-I/O cards. Two slots are provided for Mux-E1 cards, which may be configured for redundant 1+1 operation of the E1 lines, safe guarding against expensive network down time. Two slots are also available for CPU cards, with the second CPU card acting as a hot standby in case of primary card failure. Each Mux-E1 card may be linked to another ERM-Mux-plus Rack to provide a point-to-point variety of datacom, Ethernet & voice over E1 network services. The ERM-Mux-plus optionally accommodates up to two separate power supplies, which may derive power from AC (110/220) or DC (-48V) power sources. When two power supplies are installed, the modules provide complete power redundancy and are hot swappable even during the E1 cards' transmission. The ERM-Mux-plus provides all interface connections on the front panel. BNC and RJ-45 are used for E1 Line interface connections, RJ-45 connections are used for all voice (FXO, FXS, E&M), for 10/100 Ethernet Bridge and G.703-64K co-directional / contra-directional / center. Optional cable adapters are used to convert the DB-62F DCE ports of the I/O cards to 6xRS-232, HP68F DCE port of I/O card to 4x V.35, RS-232, RS-530, RS-449, RS-422 and X.21 or 5x X.50 channels.

  • CPU redundancy (1+1)
  • E1 redundancy (1+1 ) and E1 card redundancy
  • Power redundancy (1+1) [2AC, 2DC, AC+DC]
  • Drop & Insert function
  • Console, NMP, SNMP, management
  • DCE hot swappable card types

Connection with PBX (Private Branch Exchange)


The extension and expansion of DDN (Distributed Data)


  PDF Download      Where To Buy


Search Product

Follow Us

Contact Us

8F No. 60 Zhouzi St., Neihu District, Taipei 114, Taiwan
: +886-2-2659-1021 / : sales@ctcu.com

Copyright © 1993-2018 CTC Union. All Rights Reserved.

Translate