RS232 to RS422 /RS485 Interface Converter

Interface Converter - RS232 to RS422 /RS485 Interface Converter

The ic485IP Interface Converters provide asynchronous conversion between RS-232 interface and RS-485 standard interface. The RS-232 interface connection is via the unit's DB-25 female connector, while the RS-485 side's connection is via either a five screw terminal block or an RJ-45. The ic485IP converter's circuitry is not electrically isolation between the RS-232 and RS-485 sides. The RS-232 side may operate as DTE or DCE, has provisions for establishing hardware flow control, and has LEDs to indicate data transmission and reception. The RS-485 side may operate in either two wire half duplex or four wire half or full duplex and also has LED's to indicate data transmission and reception.

  • Electrically converts ASYNC RS-232 to RS-485/422
  • Baud rate up to 128kbps
  • DCE/DTE switch selectable
  • RTS/CTS control, full/half duplex
  • Simulation/monitor select switch

  PDF Download      Where To Buy

Search Product

Follow Us

Contact Us

8F No. 60 Zhouzi St., Neihu District, Taipei 114, Taiwan
: +886-2-2659-1021 / : sales@ctcu.com

Copyright © 1993-2021 CTC Union. All Rights Reserved.