FRM220-CCF40 & FRM220-CCF20

4ch / 2ch Contact Closure Fiber Converter

Contact Closure Fiber Converter: FRM220-CCF

The FRM220-CCF contact closure fiber converter provides the transmission of contact closure over a single fiber optic link. With SFP socket on fiber ports, the FRM220-CCF gives you the fiber cabling connector SFP-LC, both multi-mode and single-mode are available as well as BiDi which allows bi-directional transmission using only a single fiber cable. The FRM220-CCF has a contact input and a 0.5 amp contact output. The contact closure module has two relay outputs and two relay input. The relay output follows the “relay input” at the remote end. When the remote “relay input” is shorted, the local relay output is closed and vice-versa. The second relay output is closed when “carrier” is detected from the remote end, this indicates that the optical fiber is connected and that the remote end has power and is operating.

  • Transmits a single contact closure in one or two directions
  • Distances up to 120km
  • 30 VDC, 0.5 amp relay N.O. (Normally Open)
  • Point-to-Point transmission architecture
  • Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments
  • Relay contact for Carrier Detect, N.C. (Normally Close)
  • Indicating LEDs are provided for confirming equipment operating status
  • Alarm Event Triggering
  • Building Automation and Environmental Control Systems
  • Fire and Alarm Systems
  • Gate Control
  • PIR Signal Transmission
  • Traffic Signal Control Equipment

  PDF Download      Where To Buy


Search Product

Follow Us

Contact Us

8F No. 60 Zhouzi St., Neihu District, Taipei 114, Taiwan
: +886-2-2659-1021 / : sales@ctcu.com

Copyright © 1993-2018 CTC Union. All Rights Reserved.

Translate