FRM220-10GC-TS

10G Base-T to 10G Base-R SFP+ Media Converter

10G Base-T to 10G Base-R SFP+ Media Converter

The FRM220-10GC-TS is a copper to fiber 10G Ethernet media converter based on IEEE802.3an and IEEE802.3ae. With SNMP and Web-based management in the FRM220, the Network administrator can monitor, configure and control the activity of each card in the chassis. This converter uses Cat.6a/Cat 7 twisted pair cable as copper transmission media with RJ-45 and 10G optical solution with SFP+ LC connector. The data stream can be converted bi-directionally from 10G Base-T to 10G Base-R and vice versa. With full duplex wire speed forwarding capability between these two media, the FRM220-10GC-TS brings you the best and simplest solution for the 10G Ethernet conversion between copper wire and fiber.

  • Network Management via FRM220 Chassis
  • Complies with IEEE802.3an 10GBase-T and IEEE802.3ae 10GBase-R
  • Real-Time conversion between 10GBase-T and 10GBase-R
  • Common used SFP+ fiber interface and RJ45 connector
  • Full duplex wire speed forwarding
  • Forwarding l8k bytes jumbo packet
  • Loopback Test
  • Link Fault Pass Through
  • Fiber Fault Alert
  • IEEE 802.1q VLAN pass through
  • Supports manual Dip Switch for quick set up

10G Media Conversion application


  PDF Download      Where To Buy


Search Product

Follow Us

Contact Us

8F No. 60 Zhouzi St., Neihu District, Taipei 114, Taiwan
: +886-2-2659-1021 / : sales@ctcu.com

Copyright © 1993-2017 CTC Union. All Rights Reserved.

Translate