4E1/T1 Fiber Multiplexer: FMUX04A

FMUX04A

4E1/T1 + 3× FE Fiber Multiplexer

4E1/T1 Fiber Multiplexer: FMUX04A

The 4× E1/T1 plus 3× 10/100Base-TX Ethernet switch PDH Fiber Optical Multiplexer, FMUX04A is fixed type design that provides simultaneous multi-service through dual (1+1) fiber. The fiber optic line is based on 155Mbps SFP technology that allows the flexible use of Multimode or Single mode optics and enables support for different wavelengths and distances. The use of bi-directional SFPs maximizes the utilization of fiber optic line and results in saving fiber line costs. The multiplexer can be equipped with AC and DC dual power supplies for redundant operation. With optional SNMP and Web-based management in the FMUX04A, the administrator can monitor, configure and control both the local and remote device.

  • 4 channels unframed E1/T1 with both E1 BNC(75Ω) and E1/T1 RJ45 (120Ω) ports
  • 3× 10/100Base-TX Ethernet RJ45 ports with 100Mbps throughput)
  • Auto MDI/MDIX, Auto-Negotiation or Force mode
  • Supports flow control
  • RS-232 port with DB9 for system console
  • One alarm output port
  • Port based VLAN
  • 2 plug-in SFP slot for optical 155Mbps SFP module
  • Forward 1536 byte packets on Ethernet port
  • 1+1 fiber protection, less than 50ms
  • One RS232 clear channel with RJ45 port up to 250Kbps(Async)
  • Supports Digital Diagnostics Monitoring Interface (DDMI)
  • AIS on signal loss on E1/T1 and fiber port
  • Loopback test on E1/T1, RS-232, fiber ports
  • Supports local or remote In-band management
  • SNMP and web based management (Options)
  • Auto Laser Shudown (ALS)

 
4E1/T1+FE over fiber p to p connection Application


  PDF Download      Where To Buy


Search Product

Follow Us

Contact Us

8F No. 60 Zhouzi St., Neihu District, Taipei 114, Taiwan
: +886-2-2659-1021 / : sales@ctcu.com

Copyright © 1993-2022 CTC Union. All Rights Reserved.

Language