16x/8x E1/T1 and 4x FE, Managed Fiber Multiplexer | Network Switch & Media Converter Manufacturer | CTC Union
The 1U 19” rack mountable, PDH fiber optical Multiplexer (FMUX160/FMUX80) transmits up to 16/8 E1/T1 + 4 x 10/100Base-TX Fast Ethernet over a single fiber optic link. The FMUX160/FMUX80 chassis in available in three different power configurations; single AC, single DC, or AC+DC. The AC supplies operate from 90 ~ 240VAC while DC supplies operate from 18~60VDC. On the rear of the chassis, the BNC model provides 32/16 unbalanced 75 Ohm coaxial connections with BNC connectors while the RJ-45 model provides 16/8 balanced 120 Ohm connections over twisted pair wiring with RJ45 connectors. CTC Union is high-quality 16x/8x E1/T1 and 4x FE, Managed Fiber Multiplexer, 16 or 8x E1/T1 + 4x FE, Managed Fiber Multiplexer manufacturer from Taiwan since 1993. CTC Union, founded in 1993, is a Taiwan manufacturer of telecommunication products (ex. L2 Ethernet switch, TDM, Transponder) and industrial Ethernet switch, converter, injector. Strictly control all product design, CTC Union’s products pass strict tests and certifications ex. CE, FCC, UL, IEC 62443-4-1, EN50155, EN45545-2, IEC61850-3 standard etc. CTC Union partners with voice and data carriers, enterprises, and industrial grade Ethernet users covers all continents and areas. This global partnership receives direct engineering and technical support from headquarters, located in Taipei, Taiwan. With more 30 years professional experience, CTC Union is a Taiwan manufacturer of telecommunication products and industrial Ethernet switch, converter, injector. Strictly control all product design.
16x/8x E1/T1 and 4x FE, Managed Fiber Multiplexer
FMUX160 & FMUX80
The 1U 19” rack mountable, PDH fiber optical Multiplexer (FMUX160/FMUX80) transmits up to 16/8 E1/T1 + 4 x 10/100Base-TX Fast Ethernet over a single fiber optic link. The FMUX160/FMUX80 chassis in available in three different power configurations; single AC, single DC, or AC+DC. The AC supplies operate from 90 ~ 240VAC while DC supplies operate from 18~60VDC. On the rear of the chassis, the BNC model provides 32/16 unbalanced 75 Ohm coaxial connections with BNC connectors while the RJ-45 model provides 16/8 balanced 120 Ohm connections over twisted pair wiring with RJ45 connectors.
The FMUX160/FMUX80 gives you the fiber cabling connector ST SC FC, both multi-mode and single-mode are available as well as BiDi which allows bi-directional transmissions using only a single fiber cable. 1+1 Automatic optical line protection is also supported for the aggregate fiber ports. The standard FMUX160/ FMUX80 configuration may be viewed or set via serial VT-100 terminal connection or SNMP card with web, telnet, and SNMP management.
Features
- Provides 16/8 E1/T1 G.703 transparent transmission over fiber
- Provide 4x 10/100 Mbit/s Ethernet Ports (100Mbps aggregate)
- Provides one RS232 channel
- Loopback test on E1/T1 fiber port
- Provides one hotline channel ( order-wire )
- Supports full/half duplex, 10M/100M, auto-Negotiation
- Forward 1792 byte packets on Ethernet port
- Supports 1+1 fiber line protection. Less than 50ms
- Complete alarm function and can monitor remote device status
- Power combination AC220V and DC-48V for redundant options
- Supports RS232 local management ; Supports on-line f/w upgrade
- Supports Web, Telnet, SNMP management (optional)
- Download
Download 
16x/8x E1/T1 and 4x FE, Managed Fiber Multiplexer | Network Switch & Media Converter Manufacturer | CTC Union
Based in Taiwan since 1993, CTC Union Technologies Co., Ltd. has been a manufacturer of networking products and a provider of industrial networking solutions. Its main networking products include, 16x/8x E1/T1 and 4x FE, Managed Fiber Multiplexer, network switches, fiber optic cables, network routers, media converters, bypass switches, fiber optic multiplexers, fiber single mode media converters. Industrial networking solutions for optical transport, factory automation, intersection monitoring, wireless network security, traffic monitoring, tunnel and cell tower safety control, wireless machine networking, data offloading, PoE-powered office automation, campus network access.
CTC Union, founded in 1993, is a Taiwan manufacturer of telecommunication products (ex. L2 Ethernet switch, TDM, Transponder) and industrial Ethernet switch, converter, injector. Strictly control all product design, CTC Union’s products pass strict tests and certifications ex. CE, FCC, UL, IEC 62443-4-1, EN50155, EN45545-2, IEC61850-3 standard etc. CTC Union partners with voice and data carriers, enterprises, and industrial grade Ethernet users covers all continents and areas. This global partnership receives direct engineering and technical support from headquarters, located in Taipei, Taiwan.
CTC Union has been providing customers with high quality networking products and networking solutions since 1993, with both advanced technology and 28 years of experience, CTC Union ensures that each customer's requirements are met.