IFC-CCF40-HP

4 Channel Binary Transducer

4 Channel Binary Transducer

CTC Union IFC-CCF40-HP 4-channel binary transducer registers binary information from contacts via its binary inputs and forwards it, interference-free, to the other side transducer via fiber-optic cable, then the remote site transducer will put out the indications/signals via its contacts. Vice versa. The transducer is equipped with independent and bidirectional binary inputs (4) and contact outputs (4). The four contacts can be used as trip contacts. IFC-CCF40-HP transducer has been designed for usage in substations, water treatment and metallurgical and material engineering application, it’s an ideal solution for use in critical environment.

  • 4 isolated binary input (BI-1, BI-2, BI-3, BI-4)
  • Selectable binary input threshold level by DIP Switch (18V or 70V)
  • Maximum 2.5ma input current for binary input channel
  • 4 MSR contact relay output (K1, K2, K3, K4), maximum breaking capacity 2000VA for AC load , 50~280W for DC resistive load, or 30W for DC inductive load
  • Support multi mode fiber 2KM or single mode 30KM/60KM fiber for transmit distances
  • Support duplex fiber, or single fiber BiDi to save cabling
  • AC or DC wide range power input (60~300VDC or 60~264VAC )
  • Removable terminal block connector for Power input, Alarm, Binary input and MSR Relay output
  • CE, FCC, heavy industrial grade EMS, EMI, EN61000-6-2, EN61000-6-4 certified
  • Supports relay output for power or failure warning
  • Hardened housing with IP40 protection
  • Fanless and DIN-Rail design for harsh industrial environment

 
Figure 1 : Application connection diagram

 
Figure 2 : Application example


  PDF Download      Where To Buy


搜尋產品

關注我們

聯絡資訊

Taiwan, 114台北市內湖區洲子街60號8樓
: +886-2-2659-1021 / : sales@ctcu.com

Copyright © 1993-2019 CTC Union. All Rights Reserved.

Language