IFC-FDC-PRO, IFC-Serial-PRO

PROFIBUS to Daisy Chain Fiber Converter, PROFIBUS to Fiber Converter

PROFIBUS to Daisy Chain Fiber Converter, PROFIBUS to Fiber Converter

These products are PROFIBUS to fiber optic converters which secure PROFIBUS data transmission via fiber optical cabling for extending distance and isolating EMC/noise to reduce mutual interference between PROFIBUS devices. These products are protocol transparent, can be applied to the PROFIBUS, and also can be applied to other networks using RS485 interfaces (See Figure 1).

These converters are capable of selecting interface modes for connection to RS-485 2-wire half duplex or 4-wire full duplex. Additionally, the terminal block offers an alarm relay contact and two redundant DC power inputs. IFC Series converters are also available in two operating temperature ranges, a standard -10° to 60°C commercial temperature range and an extended -40° to 75°C range. With all these specifically designed features, the series is reliable and an ideal solution for keeping your industrial automation applications running smoothly and continuously even in harsh environments.

  • Supports 2 fiber link (IFC-FDC-PRO)
  • Supports 1 fiber link (IFC-Serial-PRO)
  • Extend serial transmission distance up to 2km, 30km, 60km
  • Supports several topology , cable redundancy (Figure 3), ring redundancy (Figure 4), daisy chain (Figure 5), point to point (IFC-FDC-PRO)
  • Supports point to point (Figure 6) (IFC-Serial-PRO)
  • Redundant dual power inputs (12/24/48VDC)
  • Protocol transparent. These products can be applied to the PROFIBUS, but also can be applied to other network using RS485 interface
  • Baudrate up to 12Mbps
  • Auto baudrate, no need to set baudrate
  • 2.5KVrms isolation for serial port
  • CE, FCC, heavy industrial grade EMS, EMI, EN61000-6-2, EN61000-6-4 certified
  • Supports relay output for power or link failure warning
  • Hardened housing with IP30 protection
  • Fanless and DIN-Rail design for harsh industrial environment
  • Adjustable pull high/low resistor and terminator for RS-422/485 transmission

Figure 1 : Application for PROFIBUS Network

Application for PROFIBUS Network
    Benefit:
  • EMC/noise isolation, to reduce mutual interference between serial port device
  • Extend distance by fiber
  • Cable redundancy
  • Isolate PROFIBUS failure
  • Achieve a reliable network environment

Figure 2 : Isolate PROFIBUS Failure

Isolate PROFIBUS Failure

Figure 3 : Fiber Cable Redundancy topology & application

Fiber Cable Redundancy topology & application

Figure 4 : Fiber Ring Redundancy topology & application

Fiber Ring Redundancy topology & application

Figure 5 : Fiber Daisy Chain topology & application

Fiber Daisy Chain topology & application

Figure 1 : IFC-Serial-PRO Application for PROFIBUS

IFC-Serial-PRO Application for PROFIBUS

Figure 2 : Fiber Point to Point topology & application

Fiber Point to Point topology & application
    Benefit:
  • Reduce mutual interference between serial port device
  • Extend distance by fiber
  • Achieve a reliable network environment

  PDF Download      Where To Buy


Search Product

Follow Us

Contact Us

8F No. 60 Zhouzi St., Neihu District, Taipei 114, Taiwan
: +886-2-2659-1021 / : sales@ctcu.com

Copyright © 1993-2018 CTC Union. All Rights Reserved.

Translate