FRM220-FXO-4, FRM220-FXS-4

4x FXO/FXS over Fiber

4x FXO/FXS over Fiber

FRM220-FXO-4/FXS-4 are 4 channel POTS (Plain Old Telephone System) over fiber converter/extender. The four POTS connection uses standard RJ-11C modular connectors for each copper pair connection. A pair of FRM220-FXO-4/FXS-4 is required to implement an end to end system. FXO type unit connects to a telephone line (PSTN) or PBX station line and has ability to detect ringing voltages and to act as a telephone. FXS type unit is the reciprocal unit and has ability to act as PSTN and connects to a telephone device. Two FXS cards may be connected back-to-back to provide a private "hot line".

When the FRM220-FXO-4/FXS-4 cards are placed in the FRM220 rack with SNMP management, in-band management allows configuring and viewing the card and remote converter's status, type, version, fiber link status, on hook status and alarms. When placed in a single slot chassis and used standalone without management, the card may be configured by DIP switch.

  • Extend telephone voice transmission up to 120km over fiber
  • Network management via terminal, web or SNMP in FRM220 chassis
  • Supports telephone voice transmission
  • Supports FXS to FXS hot line
  • Supports caller ID Pass-Through

Figure 1 : Automatic Ring down hotline

Automatic Ring down hotline

Figure 2 : Voice transmission from 2km to 120km over fiber

Voice transmission from 2km to 120km over fiber

  PDF Download      Where To Buy


Search Product

Follow Us

Contact Us

8F No. 60 Zhouzi St., Neihu District, Taipei 114, Taiwan
: +886-2-2659-1021 / : sales@ctcu.com

Copyright © 1993-2018 CTC Union. All Rights Reserved.

Translate