10G 3R FEC Multi-rate Transponder

10G Ethernet FEC Multi-rate Transponder

The FRM220-10G-FEC is a conversion module suitable for high-speed 10G signals with Forward-Error-Correction (FEC). The module supports four flexible SFP+ ports suitable for wavelength conversion and the transferring application for 10GbE and STM-64. The main field of FRM220-10G-FEC application is cost-optimized CWDM and DWDM networks. As an intelligent transponder module, the FRM220-10G-FEC converts a transparent data channel to a corresponding CWDM/DWDM wavelength. By means of the implemented 3R functionality (re-amplification, re-shaping, re-timing) for signal processing, the module is also suited for the use as a repeater. The data rates between 9.95Gbps and 11.32Gbps can be provided. Two types of housings are available for installation in a 19” FRM220 chassis. 20 slots are provided by using the FRM220-CH20 chassis 2U while the FRM220-CH08 1U supports up to 8 modules. Both housings can be monitored and configured through SNMP, Web GUI or Telnet using a NMC management module.

  • Protocol transparent (9.95 – 11.32Gbps)
  • 10Gbps signal repeating for 10GbE and STM-64
  • 10Gbps conversion: Multimode, Single mode, CWDM, DWDM
  • Future-proof and flexible SFP⁺ technology
  • 3R functionality (Re-amplification, Re-shaping and Re-clocking)
  • Low power consumption
  • SNMP management through NMC management module
  • SFP⁺ transceivers for flexible configuration including DWDM
  • SFP⁺ Digital Diagnostics
  • Wide range of applications
    • Dual OTN transponder or OTN repeater
    • Lambda conversion with FEC exchange
  • Multiple clients data rate support
    • 10G Ethernet LAN/WAN PHY
    • 10G OC-192/STM-64 SONET/SDH
  • Non OTN/FEC
    • 10G Ethernet LAN-PHY to LAN-PHY
    • 10G Ethernet LAN-PHY to WAN-PHY
  • Per interface Forward Error Correction (FEC) encoding selection:
  • Comprehensive access performance monitoring
    • ITU-T G.709 Standard RS(255,239) (GFEC) – 6.2 dB
    • ITU-T G.975.1 Section I.7 Ultra-strong FEC with scaled - overhead (UFEC 7%) – 8.1 dB
    • ITU-T G.975.1 Section I.4 Ultra-strong FEC with scaled - overhead (UFEC 10%) – 8.3 dB
    • Zero FEC (wrapper done, FEC is zero)
    • No FEC (wrapper done, FEC is disabled)
  • Comprehensive G.709 line and service performance monitoring
    • 10G Ethernet, 10G SONET/SDH
  • Connection testing tools
    • Loopback -Notification or fault propagation

10G-FEC CWDM P to P application

10G-FEC CWDM P to P application

-Related Products: FRM220-40G-1Q4S/16G-3R/10G-SXX/10G-SS/2.7G-3S (40G, 16G, 10G and 2.7G 3R Transponder)

  PDF Download      Where To Buy

Search Product

Follow Us

Contact Us

8F No. 60 Zhouzi St., Neihu District, Taipei 114, Taiwan
: +886-2-2659-1021 / :

Copyright © 1993-2018 CTC Union. All Rights Reserved.