Ethernet over E1 with SNMP Management

Ethernet over E1 with SNMP Management
The Eoe1A is a Channel Service Unit for unframed ITU-T G.703 E1 that features a built-in Ethernet bridge. The CSU has a built-in Network Terminating Unit (NTU) and may connect to either 75 Ohm unbalanced, BNC connectors or to 120 Ohm balanced, unframed E1 via twisted pairs and a shielded RJ-45 connector. The Eoe1A Ethernet Bridge uses HDLC encapsulation to transport Ethernet packets across the WAN and supports 10/100 auto-negotiation or manual settings for 10M, 100M, Full or Half Duplex Ethernet. The Ethernet port also supports a standard auto-MDIX feature that will completely eliminate Ethernet cross-over cables or the guessing that is sometimes involved in choosing a cable when connecting to a HUB or a PC. The Eoe1A is very easy to configure by a menu driven serial console interface. SNMP and proprietary MIB add the ability to manage the Eoe1A centrally through third party network management software or via CTC Union's EMS management system.
  • Supports 10/100Base-TX Ethernet over Unframed E1
  • Automatic address learning, aging and deletion after 5 minutes
  • Auto padding of undersized packets to meet the minimum Ethernet packet size requirement
  • Buffering modes can be selected according to the setting of WAN and LAN line speeds
  • Forwarding and filtering rate at WAN speed with throughput latency of 1 frame
  • Auto MDI / MDIX
  • Real-time filtering with 256 MAC address table
  • Supports Console, SNMP and Web management
  • Adjustable pay load rates of: 10K, 32K, 64K, 128K, 256K, 512K, 1024K & 2048K
PDF Download
Contact Us

8F No. 60 Zhouzi St., Neihu District, Taipei 114, Taiwan
Tel : +886-2-2659-1021
Email : sales@ctcu.com