E1/T1 over Fiber

E1/T1 over Fiber
The FRM220-E1/T1 is a fiber media transport for G.703 E1/T1 transmissions designed for point-to-point use. The BNC model provides unbalanced 75 Ohm coaxial E1 connections while the RJ-45 model provides switchable balanced 120 Ohm E1 or 100 Ohm T1 connections over twisted pair wiring. When the FRM220-E1/T1 card is placed in the FRM220 rack with in-band management, the card status, type, version, fiber link status, E1 or T1 link status and alarms for both local card and remote unit can all be displayed. When set for E1 mode, the FRM220-E1/T1 also supports fractional (structured) E1 when connected to a remote FRM220-Data, synchronous data communications converter. In an E1 transmission network where end connection requires synchronous data communication such as V.35 or RS-530 (X.21, RS-449), these units eliminate the need for an extra CSU/DSU. When placed in a single slot chassis and used standalone without management, the card may be configured by DIP switches.
  • In-band network Managed via Terminal, web or SNMP in FRM220 chassis
  • T1/E1 RJ-45 (USOC RJ-48C) or E1 Coax (BNC) to Fiber converter
  • Supports AMI or B8ZS/HDB3 line codes
  • T1 supports unframed to FRM220-Data
  • E1 supports unframed or fractional (N x 64k) to FRM220-Data
  • User selectable E1 or T1 setting
  • Electrical and optical Loop back tests
  • Standalone RS232 console management via CH01M
PDF Download
Contact Us

8F No. 60 Zhouzi St., Neihu District, Taipei 114, Taiwan
Tel : +886-2-2659-1021
Email :