FRM220A-Eoe1

Ethernet Bridge over E1

Ethernet Bridge over E1

• HDLC
• MTU 1522bytes
• Framed / Unframed E1

Description
The FRM220A-Eoe1 is an Ethernet over E1 Bridge for cost-effective connection of 10/100Base-TX or 100Base-FX LANs over a single E1 transport. By using standard HDLC encapsulation, the FRM220A-Eoe1 is able to transmit up to a 2M bits Ethernet over an E1 link. The FRM220A-Eoe1 supports an E1 attenuation of up to 43 dB on twisted pair or coax cable, which provides an approximate operating range up to 2km (using 22AWG). The FRM220A-Eoe1 fully meets E1 specifications including ITU-T G.703 and G.823. The FRM220A-Eoe1 features diagnostic capabilities for performing remote loopback. The operator at either end of the line may test both the FRM220A-Eoe1 and the line in the digital loopback mode. The Ethernet copper interface supports auto-negotiation and auto MDI/MDIX, allowing plug-and-play Ethernet connection without any additional configuration. When placed in FRM220A system, the Ethernet may be aggregated to the chassis's built in Ethernet switch. When placed in a single slot chassis and used standalone without management, the card may be configured by DIP switch.
Features
  • Built-in HDLC bridge operates at WAN rate
  • Auto-Negotiation
  • Unbalanced E1/BNC or balanced E1/RJ45
  • Fully compatible with FRM220A and FRM220 chassis
  • SNMP management with FRM220A and FRM220 chassis
  • LED Alarm indication
  • Standalone RS232 console management via CH01M
PDF Download
Contact Us

8F No. 60 Zhouzi St., Neihu District, Taipei 114, Taiwan
Tel : +886-2-2659-1021
Email : sales@ctcu.com